Teensy LC

Teensy-LC delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cortex-M0+ processor at 48 MHz, 62K Flash, 8K RAM, 12 bit analog input & output, hardware Serial, SPI & I2C, micro USB socket, and a total of 27 I/O pins.

Teensy-LC maintains the same form-factor as Teensy 3.1, with most pins offering similar peripheral features.

Real Hardware Serial

Most modern projects involve serial communication with sensors, other chips, other systems, or even the internet. Hardware serial ports greatly simplify projects and enable excellent performance.

Teensy-LC provide plenty of serial connectivity: 2 SPI ports, 2 I2C, and 3 Serial ports. All 3 serial ports are supported by high quality drivers in Teensyduino, with both transmit and receive buffering, and even support for RS485 transmitter enable.

Teensy-LC will be ideal for inexpensive "Internet Of Things" projects when paired with a ESP8266 Wifi module, which requires a fast hardware serial or SPI port.

Efficient USB Communication

Teensy-LC has the same powerful USB hardware as Teensy 3.1. All USB data transfer is done directly to memory with minimal CPU overhead.

Teensy-LC supports USB Serial, MIDI, Keyboard (international layouts), Mouse, Joystick, and RawHID protocols. A full set of 16 bidirectional USB endpoints are supported by the hardware, allowing any type of USB device. As more USB protocols are added to Teensyduino, despite its low cost, Teensy-LC will be up the task.

Hardware Timers

Many Arduino libraries require a hardware timer. Traditional Arduino products have 3 or 4 timers, with only 1 or 2 providing more than 8 bit resolution.

Teensy-LC has a total of 7 timers, all of them with 16 or more bits of resolution, to allow excellent compatibility with easy-to-use libraries. Many combinations of popular libraries, which would normally conflict, can seamlessly run together on Teensy LC and Teensy 3.1.

Analog Input & Output at 12 Bit Resolution

Analog signals are critically important to many projects. Teensy-LC has 13 pins than can function as analog inputs. The effective analog resolution is 12 bits.

It also has a true 12 bit digital to analog converter, for an analog output signal.

32 bit ARM Cortex M0+ Processor

The Cortex-M0+ processor is a powerful, full 32 bit CPU, designed for lower power, lower cost devices.

Cortex-M0+ has fewer instructions and a simpler bus structure than the more powerful Cortex-M4 on Teensy 3.1. For simple code, M0+ often runs at similar speed, when running at the same clock frequency. For math-intensive applications, Cortex-M4 can be significantly faster, and of course it supports higher clock rates.

Cortex-M0+ at 48 MHz is much faster than 8 bit AVR processors at 16 MHz, especially when manipulating 16 and 32 bit variables!

Compared With Teensy 3.1...

Some features of Teensy 3.1 simply aren't available at this lower price point.

The I/O pins are not 5V tolerant.
The maximum speed is only 48 MHz, and the Cortex-M0+ omits M4's special math instructions.
CAN bus is not available.
Teensy-LC has only 4 lightweight DMA channels, rather than 16 fully featured channels.
Serial1 & Serial2 have only standard buffers, not FIFOs.
Fewer hardware timers are available.

Features

Feature	Teensy LC	Units
Processor Core Rated Speed Overclockable	MKL26Z64VFT4 Cortex-M0+ 48 -	MHz MHz
Flash Memory Bandwidth Cache	62 96 64	kbytes Mbytes/sec Bytes
RAM	8	kbytes
EEPROM	1/8 (emu)	kbytes
Direct Memory Access	4	Channels
Digital I/O Voltage Output Current Output Voltage Input	27 3.3V + one 5V 5mA + four 20mA 3.3V Only	Pins Volts milliAmps Volts
Analog Input Converters Resolution Usable Prog Gain Amp Touch Sensing Comparators	13 1 16 12 0 11 1	Pins Bits Bits Pins
Analog Output DAC Resolution	1 12	Pins Bits
Timers FTM Type PWM Outputs PDB Type CMT (infrared) Type LPTMR Type PIT (interval) Type Systick RTC (date/time) **	7 Total 3 10 0 0 1 2 1 0	Pins
Communication USB Serial With FIFOs High Res Baud Fast Clock SPI With FIFOs I2C CAN Bus I2S Audio FIFO Size	1 3 0 0 1 2 1 2 0 1 4
RTC requires a 32.768 kHz crystal & 3V battery. See the Time Library for details. Teensy-LC has RTC logic on-chip, but lacks the oscillator & battery backup power.