VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG

Adafruit VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG
Cliquer pour agrandir
Prix : 28,78€
(23,98€ + VAT)
Disponibilité : 7 - 10 days
Modèle : VS1053
Fabricant : Adafruit
Évaluation : Aucune évaluation

Quantité : + Panier Comparer
Adafruit

VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG

This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can also be used to record audio in both PCM (WAV) and compressed Ogg Vorbis. You can do all sorts of stuff with the audio as well such as adjusting bass, treble, and volume digitally. There is also 8 GPIO pins that can be used for stuff like lighting up small LEDs or reading buttons.

Features

  • VS1053B DSP Audio Codec chip
  • Supports MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV
  • SPI Interface
  • Supply Voltage: 3.3V - 5V
  • GPIO Pins 3.3V
  • Dimensions: 27.72mm (1.09") x 58.08mm (2.28")

All this functionality is implemented in a light-weight SPI interface so nearly any microcontroller can play audio from an SD card. There's also a special MIDI mode that you can boot the chip into that will read 'classic' 31250Kbaud MIDI data on a UART pin and act like a synth/drum machine - there are dozens of built-in drum and sample effects! But the chip is a pain to solder, and needs a lot of extras. That's why we spun up the best breakout, perfect for use with an Arduino but also good for other microcontrollers that just don't have the computational power to decode MP3s.

The breakout is slim enough to fit on a breadboard with 1 row of holes left over for wiring. There's 3.3v and 1.8v regulators onboard with ferrite beads and analog filtering for quality analog output. There's a microphone input port that you can wire up a line-in or mic to and record compressed audio. All 8 GPIO are broken out and they all have built in 100K pulldowns, simply connect your button from the GPIO pin to 3.3V for an active-high connection. You'll likely want to play music from a microSD card so we added a holder on-board. And since we know so many of our customers use 5V microcontrollers like the Arduino, we made the interface pins all 5V compliant with level shifters so you can use the chip at 3V or 5V power/logic!

The board comes fully assembled and tested with some 0.1" male headers you can solder, so it plugs into a breadboard. And a bonus stereo headphone jack that will be handy when you want to plug headphones in!

Documents

 

Audio-Sound Breakout - WTV020SD
Audio-Sound Breakout - WTV020SD
WIG-11125
18,35€    
4 sur 5 Étoiles !
Tsunami Super WAV Trigger
Tsunami Super WAV Trigger
WIG-13810
104,33€    
Arduino MIDI Shield (Blindage)
Arduino MIDI Shield (Blindage)
DEV-12898
17,27€    
MP3 Trigger
MP3 Trigger
WIG-13720
46,05€    
WAV Trigger
WAV Trigger
WIG-13660
46,05€    
Mono Audio Amp Breakout - TPA2005D1
Mono Audio Amp Breakout - TPA2005D1
BOB-11044
7,91€    
USB Host Board - MIDI device
USB Host Board - MIDI device
USBHOST-MIDI

5 sur 5 Étoiles !
MP3 Player Arduino Shield
MP3 Player Arduino Shield
DEV-12660
30,22€    
MIDI Breakout Board
MIDI Breakout Board
MIDI-BB
8,63€    
Mono 2.5W Class D Audio Amplifier - PAM8302
Mono 2.5W Class D Audio Amplifier - PAM8302
PAM8302
5,76€    
Écrire un avis
Votre nom :


Votre avis : N.B. : Le HTML n'est pas pris en charge !

Évaluation : Mauvais            Bon

Saisir le code ci-dessous :

VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG
Cliquer pour agrandir
VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG
Cliquer pour agrandir
VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG
Cliquer pour agrandir
VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG
$ ,78€ New In Stock
Panier
Aucun article
 
Frais de Livraison

France & EU - poste aerienne de 3.54€ +VAT
Plus d'informations...

 
Marques
 
 Check out our videos
Follow us on:
acebook