10:1 Micro Metal Gearmotor HP Extended Shaft

Pololu 10:1 Micro Metal Gearmotor HP Extended Shaft
Cliquer pour agrandir
Prix : 15,58€
(12,99€ + VAT)
Disponibilité : 13
Modèle : MMGEARMOT-HP10-EXT
Fabricant : Pololu
Évaluation : Aucune évaluation

Quantité : + Panier Comparer
Pololu

10:1 Micro Metal Gearmotor HP - Extended Shaft

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, high-power motor with 9.96:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft.

This version also has an additional 1mm-diameter output shaft that protrudes from the rear of the motor. This 4.5mm-long rear shaft rotates at the same speed as the input to the gearbox and offers a way to add a custom-built encoder to provide motor speed or position feedback.

Key specs at 6 V: 3000 RPM and 120 mA free-run, 4 oz-in (0.3 kg-cm) and 1.6 A stall.

These tiny, high-quality motors are intended for use at 6 V. In general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 - 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. All of the micro metal gearmotors have the same physical dimensions, but they come in a wide range of gear ratios—from 5:1 up to 1000:1 (we don't stock them all but can source from Pololu) —and let you choose between two different motors: high-power (HP) and standard.

The gearbox has a long (0.365" or 9.27 mm), 3 mm-diameter D-shaped metal output shaft, and the brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch). It weighs approximately 0.35 oz (10 g).

Specifications

Ratio 9.96 : 1
Free Run RPM 3000
Free Run Current 120mA
Stall Current 1600mA
stall torque (oz-in / kg-cm) 4 / 0.3
weight (oz / g) 0.35 / 10

 

   
   
   
   
   
   

 

 

Écrire un avis
Votre nom :


Votre avis : N.B. : Le HTML n'est pas pris en charge !

Évaluation : Mauvais            Bon

Saisir le code ci-dessous :

10:1 Micro Metal Gearmotor HP Extended Shaft
Cliquer pour agrandir
10:1 Micro Metal Gearmotor HP Extended Shaft
$ ,58€ New In Stock
Panier
Aucun article
 
Frais de Livraison

France & EU - poste aerienne de 3.54€ +VAT
Plus d'informations...

 
Marques
 
 Check out our videos
Follow us on:
acebook