Panel Mount Ethernet Extension Cable

Panel Mount Ethernet Extension Cable
Cliquer pour agrandir
Prix : 5,47€
(4,56€ + VAT)
Disponibilité : 30
Modèle : CAB-ETH-PAN-1FT
Évaluation : Aucune évaluation

Quantité : + Panier Comparer

Panel Mount Ethernet Extension Cable

This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful when putting a Raspberry Pi or Arduino Ethernet into a box.

The jack half has two mounting 'ears' with M3x6 screws installed, 0.984" inch / 27mm apart.If you want to reverse the screws around, the plastic can be screwed through but you might need longer scews. Entire unit is 12.5" long but discounting 0.5" for the head of the RJ45 plug takes the practical length down to 12".

Technical Details

  • Panel mount Ethernet 8P socket with Ethernet 8P plug at cable end. Straight-through extension
  • CAT 5e
  • 24 AWG wires
  • 12.5" long / 32 cm from tip to tip
  • 10" / 25 cm cabling from jack to connector
  • Two 3mmx6mm mounting screws, 27mm apart
  • Plastic "boot" at Ethernet end is 22mm tall x 36mm wide x 29mm deep

 

Écrire un avis
Votre nom :


Votre avis : N.B. : Le HTML n'est pas pris en charge !

Évaluation : Mauvais            Bon

Saisir le code ci-dessous :

Il n'y a aucune image supplémentaire pour ce produit.
Panel Mount Ethernet Extension Cable
$ 47€ New In Stock
Panier
Aucun article
 
Frais de Livraison

France & EU - poste aerienne de 3.54€ +VAT
Plus d'informations...

 
Marques
 
 Check out our videos
Follow us on:
acebook