MIDI Player

MIDI Player

In this tutorial we are going to create a working MIDI Player which can be connected up to a USB MIDI device like a Keyboard, Drum Set etc.

To complete the building we need the following components

  • USB Host Board (either Mini or Standard) with the MIDI software installed. This allows you to plug in a USB MIDI device and outputs MIDI strings via its serial port at the standard MIDI rate of 31250 baud.
  • Teensy 3.1. This is the brains of the MIDI Player and will contain all the MIDI code
  • Teensy Audio Adapter. This allows you to output CD quality audio via the stereo headphone and stereo line-level output.
  • USB MIDI Device. We are using an Akai keyboard

Here are the assembled components

 

   USB MIDI Keyboard

Wiring it up

Connection of components is very simple. We need to supply the USB Host board with 5V and GND from the Teensy board and also connect the Teensy's RX0 input (pin 0) to the USB Host boards TX pin. See the following pictures

Teensy 3.1 with Audio board underneath
Connections on the back of the Audio board which go to the USB Host board

USB Host Board

Mini or Standard board

Software

The Teensy board is programmed using the Arduino IDE (check Teensy website for supported version). Along with the Arduino software you will need the following libraries and the MIDI Player example.

Teensduino for Arduino - allows you to run Arduino sketches on the Teensy and Teensy++ boards
Teensy Audio Library
Teensy MIDI Library
Teensy Midi Player Example

Panier
Aucun article
 
Frais de Livraison

France & EU - poste aerienne de 3.56€ +VAT
Plus d'informations...

 
Marques
 
 Check out our videos