MP3 Trigger

SparkFun MP3 Trigger
Cliquer pour agrandir
Prix : 46,05€
(38,37€ + VAT)
Disponibilité : 15
Modèle : WIG-13720
Fabricant : SparkFun
Évaluation : Aucune évaluation

Quantité : + Panier Comparer
SparkFun

MP3 Trigger

Make some noise with your next project! The MP3 Trigger board is built to make MP3 sound integration easier than ever. The board has 18 external trigger pins that will directly trigger pre-selected MP3 tracks, and a full-duplex serial control port that provides full transport control, remote triggering for up to 256 tracks, and fast real-time volume control. MP3s are stored on FAT16 formatted SDSC or FAT32 formatted SDHC micro-SD flash memory cards. In addition, optimized code now achieves 192Kbps stereo playback from a wider range of cards than before.

The heart of the MP3 Trigger board is the Cypress PSoC CY8C29466-24SXI microcontroller which serves up MP3 data to a VLSI VS1063 audio codec IC. This version also supports an optional initialization file that can be used to set the serial port baud rate as well as to reprogram any of the 18 trigger inputs to alternate functions, including random and sequential track selection, transport controls and even volume up/down. Each conventional trigger can be set to either allow immediate restarts, or to lock out restarts if audio is playing. Also, a new trigger filename convention provides greater flexibility in naming your MP3 tracks and makes file management easier.

There is also a “Quiet Mode” feature that can be enabled via the serial control port. In this mode, the trigger inputs don’t start tracks directly, but instead produce a serial message indicating which triggers were activated. A host microcontroller can thus monitor the trigger inputs and then start any track or sequence of tracks via the serial control port, making the triggers much more flexible.

Check the link in the documents below to keep up with the latest Firmware updates!

Note: This product is a collaboration with Robertsonics. A portion of each sales goes back to them for product support and continued development.

Features:

  • Input voltage: 4.5-12VDC
  • Current Consumption: 45mA idle, 85mA playing
  • File system: FAT16/FAT32
  • Audio out: 1/8" stereo headphone
  • Trigger inputs: 3.3-5V, active low inputs with internal pull-ups
  • Serial: Full duplex, 8N1, 38.4K baud

Documents:

 

5 Pin DIN PCB Socket
5 Pin DIN PCB Socket
5DIN-PCB
0,58€    
8GB Micro SD Memory Card
8GB Micro SD Memory Card
8GB-USD-V7
8,27€    
Tsunami Super WAV Trigger
Tsunami Super WAV Trigger
WIG-13810
104,33€    
Mono Audio Amp Breakout - TPA2005D1
Mono Audio Amp Breakout - TPA2005D1
BOB-11044
7,91€    
MP3 Player Arduino Shield
MP3 Player Arduino Shield
DEV-12660
30,22€    
VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG
VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG
VS1053
28,78€    
5 Pin DIN Chassis Socket
5 Pin DIN Chassis Socket
5DIN-SKT-C
0,65€    
5 Pin DIN Plug
5 Pin DIN Plug
5DIN-PLUG
0,63€    
WAV Trigger
WAV Trigger
WIG-13660
46,05€    
MIDI Breakout Board
MIDI Breakout Board
MIDI-BB
8,63€    
Mono 2.5W Class D Audio Amplifier - PAM8302
Mono 2.5W Class D Audio Amplifier - PAM8302
PAM8302
5,76€    
Écrire un avis
Votre nom :


Votre avis : N.B. : Le HTML n'est pas pris en charge !

Évaluation : Mauvais            Bon

Saisir le code ci-dessous :

MP3 Trigger
Cliquer pour agrandir
MP3 Trigger
Cliquer pour agrandir
MP3 Trigger
Cliquer pour agrandir
MP3 Trigger
$ ,05€ New In Stock
Panier
Aucun article
 
Frais de Livraison

France & EU - poste aerienne de 3.54€ +VAT
Plus d'informations...

 
Marques
 
 Check out our videos
Follow us on:
acebook